Finally we can get the full Tron Sets running off a single portable driver. This Tron Full EL Panel Set is a combination of the Flynn Replica Torso Set and the Tron Leg Set. There are details of how we suggest the layout for replica below. It goes on a bit, but that is to help you get it exactly right.It is all actually very easy to use and just clips together. The guy on the right of the picture below has used the set to make a copy of the Sam Flynn costume (please note we do not supply the disc he is holding). The girl on the left has created her own Tron inspired design with the same set.
The design is completely flexible if you want to use it that way. We suggest finding a comfortable garment to attach it to. All these Tron Sets comes with sew-able valcro to go on the costume and sticky hook & loop tape that goes on the back of the panel making it very easy to attach to any clothing. The full list of what you get with this set and our suggested layout. 1 Two pieces of replica shaped EL Tape for the front of a Sam Flynn Costume - a Left and a Right.
2 A single 1cm x 15cm EL Tape for the glowing mid line. 3 A 14cm EL Identity Disc for the back of the costume.
4 Two pieces of 2cm x 40cm Curved EL Tape for the back of a Tron Costume - It is curved to go round the ID Disc and over the shoulder. 5 Two Pieces of 1.5cm x 15cm EL Tape for the top of the arms of the Tron costume.
6 2 x 2-way splitters, a 2 x mini 3-way splitter, 1 x 5-way splitter, and 2 x short-long splitter to make it a simple'plug and play' but also with plenty of room for the wire to stretch around the costume. 7 1.5metres of hook & loop tape - with sticky hoop and sew-able loop to make it easy to attach the set to a costume and have it removable.
The Set is only available in. The whole kit is ready to use - just plug and play! If you are making a costume, it is a good idea to plan it out properly. For this set, the Driver/Inverter is very powerful and comes with a separate power pack. So here are the dimensions of all the parts plus lengths of wire between them.
Feel free to message us if you have any questions. Takes 8 x AA batteries (not supplied) and is 12.7cm x 7.2cm x 1.9cm. It has a 65cm thin power wire coming out of it that leads to the.. The inverter is 6cm x 4cm x 4cm. It has the controls on it - Off, Flashing or On.
It has a 55cm wire coming out of it that leads to the.. The Splitter is 40cm long in total. It is 20cm of wire which then splits into 3 separate strands which are all 20cm long - 2 of them then lead to.. Left and Right Flynn Replica EL Tapes. The EL Tape is 30 cm from top to tail with the stick and hoop that comes in near the shoulder adding another 8cm.
The tape is just 350 microns thick - that is 1/3rd of a millimetre! Sticky back hook & loop tape is supplied that is the exact width of the EL Tape - be careful putting it on as that glue is VERY sticky. You must sew the other part of the hook & loop tape onto the costume making it very convenient to attach and remove. Of course, you don't need to use the hook & loop tape and fix it any way you choose.Sam Flynn has a small line of light that runs down the middle of his chest. This is lit by the 1cm x 15cm EL Tape provided. This tape can be easily cut to shape if you prefer it smaller. This Large El Hoop is 14cm in diameter, there are two thin EL Tapes running in concentric circles and the inner diameter is just over 9cm across. The EL Tape is curved so is 37 cm from top to tail - it has been designed to go on the back round the ID disc and curve over the shoulder. EL Tape for the Arms. 2pcs of 1cm x 15cm EL Tape, one for each arm. This is how we recommend using the splitters. A 2-way splitter coming straight from the Inverter - this divides the front and the back.
The First channel goes to a 3-way splitter. To power the front of the costume - The left and right Flynn Tape plus the mid-line.
Can be fitted with the extender wire and this will allow it to reach to the back of the costume. A 3-way splitter attaches to this. 1 channel does the 1cm x 15cm left arm. 2nd channel does the left 2cm x 40cm curved outline.The 3rd channel has another 3 way splitter on it. 1st channel attaches to the ID Disc. 2nd Channel has the Right 2cm x 40cm curved outline. 3rd channel does the 1cm x 15cm right arm.
Depending on where you have the inverter, you may or may not need the extender wire. 1 Two pieces of replica shaped EL Tape for the boots of a Tron Costume - Sam Flynn, Rinzler or Quorra. 2 Two pieces of shaped and angled EL Tape to go round the knees.
3 Two pieces of sacral shaped EL Panel to go at the lower back. 4 Two pieces of 2cm x 25cm EL Tape. 5 A Powerful 8 x AA battery pack for the EL Driver. 6 A 2-way splitter, A 3-way splitter and 2 x'Short, Medium and Long' Splitter.
7 1.5metres of hook & loop tape - with sticky hoop and sewable loop to make it easy to attach the set to a costume and have it removable. The Leg Set is available in. Feel free to message me if you have any questions.
The Torso and Leg set run off the same Driver. It is 20cm of wire which then splits into separate strands which are all 20cm long.
A 3-way splitter attaches to the driver. One of these channels has a 2-way splitter attached that runs round the back to clip into the pair of EL Sacral pieces.
The other two channels have a special'3 way Small Midi and Long' splitter attached to them that run down each leg. One Short channel that plugs to the 25cm Tape.
Then the Middle channel plugs into the Knee Joint section. The Long channel goes down to the Shin to plug into the Double Hoop. The three pieces of EL Tape that run down the leg are. This 15cm Double Hoop is designed to run from your shin to the ankle to give a great finishing touch to any Tron costume these are also available for other parts of your Tron costume in our store.
Running up from the boot piece, this piece of EL Tape takes an angle round the knee, exactly as in the original costumes. This has been made to the largest size and will not fit everyone so it has been designed so you can just snip it down to the right size for you. That's right, it really is as easy as just cutting the unwanted part off either or both ends (sealing the cut with sellotape, glue or clear nail varnish is highly recommended). 3 2cm x 25cm EL Tape.
Another piece that can be cut to size is this straight piece of EL Tape that runs from the Knee Joint up to join the top half of the costume. Coming off the two way splitter at the back of the costume. This pair of pieces sits at the base of the spine and looks pretty awesome.The tape is just 350 microns thick - that is 1/3rd of a milimeter! Of course you don't need to use the hook & loop tape, fix it any way you choose. - - - - - - -. This EL Tape comes with a standard connector so simply plugs into any EL driver - this makes it easy to change between coloured wire on one driver.
By using splitters you can also connect different strands to the same driver. VISIT OUR SHOP TO SEE OUR RANGE OF INVERTER/DRIVERS, SPLITTERS AND OTHER EL WIRE. The item "Sam Flynn Tron Style EL Panel Costume FULL Set = Torso + Legs Glowing Tape" is in sale since Sunday, April 7, 2019. This item is in the category "Clothes, Shoes & Accessories\Specialty\Fancy Dress & Period Costume\Fancy Dress\Men's Fancy Dress". The seller is "elwirecraft" and is located in Cross in Hand.
This item can be shipped worldwide.